جزازة دوارة Kuhn FC 9530 D-FF

Used KUHN FC 9530 R-FF rear mower (butterfly) and KUHN FC 3525 R-FF front mower combination, year of manufacture 2024.

The machines are in very good working condition and fully prepared for work.

KUHN FC 9530 R-FF rear mower:
Working width in combination with front mower: 9.53 m
Overlap between front and rear mowers with 3.10 m front mower: 30–50 cm
Overlap between front and rear mowers with 3.50 m front mower: 50–70 cm
Transport width: 2.95 m
Cutterbar: OPTIDISC ELITE
Number of discs (individual mower width): 2 × 8
Quick-change blades: FAST-FIT
Cutting height with standard skids: 35 to 65 mm
Bearing protection with shear hub: PROTECTADRIVE
Ground following system: pendulum type
Suspension: LIFT-CONTROL hydropneumatic
Non-stop protection system
Conditioning system: SQUAREFLEX with two polyurethane rollers
Conditioner speed: 780 rpm
Average swath width: 2 × 1.85 / 2.4 m
Wide spreading system: standard
Headland management: hydraulic cylinder
Function control: lifting and transport position
Hitch: three-point linkage Cat. III and 4N
Parking position: folded or unfolded on parking stands
PTO speed: 1000 rpm
Overload protection: standard
Slip clutch: integrated in side skids
Required tractor power: 154 kW / 210 HP
Required tractor hydraulic connections: 2 double-acting
Required tractor electrical connections: 1 × 7-pin socket
Road lighting system: standard
Rear mower weight: 3330 kg
PTO shaft: 1 3/8" 6
Side skids for cutting height adjustment: 45–85 mm

KUHN FC 3525 R-FF front mower:
Working width: 3.5 m
Transport width: 3.48 m
Cutterbar: OPTIDISC ELITE
Number of discs with protective skids: 8
Blade fastening: FAST-FIT quick-change
Cutting height with standard skids: 35 to 65 mm
Top-access disc removal: standard
Cutterbar protection system with shear hub: PROTECTADRIVE
Ground following system: pivoting link arms
Suspension: LIFT-CONTROL hydropneumatic
Conditioner: SQUAREFLEX with two polyurethane rollers
Conditioner speed: 780 rpm
Conditioner drive with anti-blocking system
Approximate swath width: 1.4 to 2.0 m
Headland turning system: hydraulic cylinder
Hitch: three-point linkage Cat. II
PTO speed: 1000 rpm (clockwise viewed from tractor cab)
Slip clutch integrated in gearbox: standard
Theoretical required tractor power: 57 kW / 77 HP
Required tractor hydraulic connections: 1 single-acting
Required tractor electrical connections: 1 × 7-pin socket
Outline lighting: standard
Approximate weight: 1390 kg
PTO shaft: 1 3/8" 6
Side skids for cutting height adjustment: 45–85 mm

Machines located in Kaunas, Lithuania